Blackberry Dialler for v.4.7 (OS 4.7 up to 6 )
FREE DOWNLOAD from easy-VOIP.

Blackberry Dialler v.7.0 (OS 7.0 and above non-touch and touch)
FREE DOWNLOAD from easy-VOIP.

(*For UAE versions, please contact us)

Connection
The dialler always tries to automatically detect the best connection method in the following order:
(1) WiFi - for WiFi enabled devices
(2) Direct TCP - a connection to be opened from the BlackBerry smartphone without using BlackBerry MDS. Users who cannot establish WiFi connection are advised to use Direct TCP.

APN - Access Point Name.
These settings should be setup only if you are using Access Point for connection. However, this method requires a few configuration steps in phone settings: under Options > TCP/IP - enable APN Settings (the APN name of your network provider, user name and password fields must be supplied, if necessary) optionally register host routing table: Options > Host Routing Table > BB menu button > Register Now (phone restart might be required afterwards)

Note: If there are flashing arrows in the application's right upper corner while transferring any data (i.e. registration procedure, calling), your internet connection is successfully established.

No Connection through BIS or BES
The dialer cannot operate on connections provided by Blackberry Internet Service (BIS) and Blackberry Enterprise Server (BES).

The easy-VOIP account username and password need to be entered, and then you can make your call as you would normally through the easy-VOIP service.

International numbers are dialled with the international code (without 00). Example, to call India you would dial 91xxxxxxxxxx Please remember to add 44 before calling any UK number. Example, to call our customer service number in the UK dial +44 844 804 2802.

easy-VOIP uses SIP (session initiated protocol) and is easy-voip's lowest cost telephone service, with prices starting at less than 1 US cent per minute! (less than 0.5p in UK currency). Click here for more information.